Super SpecPlug Fast-Setting Hydraulic-Cement Mortar (Pack of 6)｜ Other Products

Super SpecPlug is a super fast-setting hydraulic-cement mortar that stops flowing water through holes and cracks in concrete and masonry in about 90 seconds
Super SpecPlug is a single-component, add-water mortar that expands slightly as it sets, forming a durable, watertight bond without shrinking or oxidizing. It's certified to NSF/ANSI Standard 61 for potable water contact.
Key Features & Benefits

Single-component — just add water
Sets in approximately 90 seconds, rapidly stopping water flow
Expands as it sets for a strong, watertight bond
Will not shrink or oxidize
Certified to NSF/ANSI Standard 61 for potable water contact

Application Instructions

Enlarge cracks to at least 3/4" in width and depth, cut square or undercut (avoid "V" shaped cuts)
Clean the substrate thoroughly to remove grease, wax, oil, and other contaminants
Saturate the surface with water, leaving no standing water
Mix with clean water to a putty consistency — approximately 20-21% water by weight, or about 9.5 pints per 50 lbs of product
Mix only what can be placed within 2 minutes
For vertical or moving-water applications, hold firmly in place until final set, about 3 minutes
Keep damp for optimal strength — wet curing for up to 2 days gives the best results

Technical Data Summary

Set Time (70°F, ASTM C109): Initial set 40 minutes, final set 70 minutes

Shelf Life: 18 months in unopened containers, stored between 45°F and 90°F

Packaging
Available in 50 lb pails.
Supporting Documents
Safety Data Sheet (SDS)
Technical Data Sheet (TDS)
Brand:SpecChemSKU:SSPLUG-PAILTags:Cementitious Products and Liquids